Dragonfly Trackers

List of articles

Firmware Update 260910: Smoother Reconnections & Adaptive Radio

The September update 260910 for your Dragonfly trackers is out! I focused primarily on how the trackers and receiver handle challenging RF conditions—specifically, how quickly they recover from signal loss and how they adaptively manage data throughput.

Key Highlights in Release 260910

  • 🔄 Smoother Reconnection After Lost Signal Trackers losing sync no longer block their communication thread with aggressive retry loops, ensuring an immediate and smooth reconnection the moment you step back into range.
  • 📡 Adaptive Radio Windows on Receiver The receiver now automatically widens transmission windows under persistent packet loss, prioritizing reliability and restoring maximum throughput as connection strength returns.
  • 🖱️ False Button Press Filtering I filtered out startup and USB-wake glitches to prevent accidental button-hold triggers that could put the tracker in an unwanted state.
  • 🧼 Clean Calibration Buffering Fixed sample overlaps so subsequent calibration attempts always use completely fresh, uncontaminated sensor readings.
  • 🔌 1200-Baud DFU Touch Added serial DFU touch support, allowing compatible tools to trigger bootloader mode over a USB connection without the need for hardware button combinations.
Firmware Update 260824: VQF Tuning & Math Protection

The second August update 260824 for Dragonfly trackers dives deep into mathematics and sensor fusion. I retuned the core fusion calculations for even less drift and added robust protection against software math crashes that previously caused unexpected orientation freezes in VR.

Key Highlights in Release 260824

  • 🎯 Major VQF Tuning (Less Drift) I fully retuned bias estimation, stationary detection, and magnetic disturbance handling. This resolves filter over-fitting and noticeably improves long-term drift.
  • ⚙️ High-Rate Calibration Fix Replaced spin-polling loops with semaphores. Zero-rate (ZRO) sensor calibration on ICM sensors now runs cleanly at a full 409.6 Hz without dropping samples.
  • 🛡️ Math Crash Protection (NaN/Inf Filter) Invalid floating-point states are now caught and rejected immediately, preventing sudden orientation freezes or spinning tracker bugs.
  • 🔒 Protected Calibration State Reboot and bootloader markers are now isolated to prevent accidental corruption of yaw orientation or saved offsets during reboots.
  • 🚥 TDMA Frame Limiting I capped sensor packets to one per TDMA window to ensure smooth, unchoked throughput across multiple units on the network.
Firmware Update 260807: Dynamic Timeouts & Clean Deep Sleep

The August update 260807 for Dragonfly trackers is here, focusing on hardware longevity—both in terms of battery life per charge and the overall lifespan of the components. I introduced dynamic sleep states and fixed power drain during deep sleep.

Key Highlights in Release 260807

  • ⏳ Dynamic Active Timeout I introduced two different sleep timers. If a tracker is accidentally bumped with no real movement following, it goes back to sleep after just 90 seconds to conserve power. Normal session activity keeps the standard 10-minute active window open.
  • 🔋 More Accurate Voltage Sampling ADC readings now pause briefly to allow hardware voltage dividers to settle. This smooths out sudden percentage fluctuations and jumps.
  • 💾 Flash Wear Reduction Temperature calibration data and online offsets are now flushed to memory lazily rather than constantly written, significantly preserving internal flash lifespan.
  • 💤 Clean Deep Sleep Power I fixed the GPIO regulator signals to ensure 3.3V power rails are fully powered down during system-off, reducing standby power drain to near-zero.
Firmware Update 260708: Learned Battery Curves & Rest State

The July update 260708 for your Dragonfly trackers is packed with improvements for long VR nights. I focused on more accurate battery tracking—which now learns its own discharge curve over time—and fine-tuned stationary detection and wake-up times so you can chill in VRChat uninterrupted.

Key Highlights in Release 260708

  • 🔋 Learned Battery Discharge Curves Trackers now learn your battery's actual discharge behavior over time, making runtime estimates and percentages significantly more accurate.
  • ⚡ Fast Wake-on-Motion Resume I greatly reduced the latency between picking up a sleeping tracker and having it instantly stream orientation data back to the server.
  • 🔌 Power Plug Debouncing I eliminated false battery state jumps and blinking charging states that could occur when plugging or unplugging the charging cable.
  • 🧘 Enhanced Stationary Detection Upgraded the rest-state detection (combining gyro, delta quaternion, and linear acceleration) to keep orientation perfectly steady while idling.
  • ⏳ Extended Active Timeout I raised the default idle timeout to 15 minutes to prevent unwanted sleep during casual VR hangout sessions.
Firmware Update 260606: TDMA by Default & Drift Reduction

The June update 260606 for my Dragonfly trackers is here! The main goal of this release is maximum wireless connection stability and absolute orientation accuracy during long gaming sessions. That's why I've decided to make advanced TDMA scheduling the new standard.

Key Highlights in Release 260606

  • ⏱️ TDMA Enabled by Default Time-Division Multiple Access is now the absolute standard for all my trackers, ensuring clean multi-tracker communication without any packet loss.
  • 🎯 Yaw Drift Reduction I updated the VQF filter parameters and synchronized backend fusion constants to maintain rock-solid orientation over long sessions.
  • 🛡️ Reliable Wireless Flashing Trackers are automatically kept awake throughout the update session, preventing timeouts and premature sleep in the middle of a flash.
Firmware Update 260528: Update Protection & Receiver Self-Update

Just a day after the major update, I'm releasing a smaller but critical update 260528 for your Dragonfly trackers. I focused on the absolute safety of the over-the-air updating process so you don't accidentally brick your devices, and I added the ability to update the USB receiver itself.

Key Highlights in Release 260528

  • 🛡️ Update Interruption Protection Sleep modes and button actions are now strictly disabled during an OTA update to prevent incomplete flashes or bricking.
  • 💾 Flash Memory Boundary Protection I hardened the write logic to prevent update images from accidentally touching critical bootloader/MBR sectors.
  • 📻 Receiver Self-Update Added full support for receiver firmware updates directly via the USB HID interface.
Firmware Update 260527: Fast ESB Updates & Refined WoM

The May update rush for Dragonfly trackers continues! In release 260527, I focused on raw performance and speed—whether it's lightning-fast firmware flashing directly through your receiver or optimizing radio transmissions so your trackers never talk over each other.

Key Highlights in Release 260527

  • ⚡ Fast ESB OTA Updates I've introduced direct, high-speed over-the-air firmware updates via the radio dongle. It automatically skips unchanged flash pages to drastically speed up the update process.
  • 📡 Improved TDMA Radio Sync Achieved higher clock synchronization accuracy and slot-checking, effectively reducing packet collisions between multiple active trackers.
  • 🏃‍♂️ Refined Wake-on-Motion (WoM) I fine-tuned the sensitivity thresholds to avoid accidental wake-ups from minor desk bumps while ensuring an instant response when you pick the tracker up.
  • 🚀 Performance Optimization Streamlined vector processing and enabled Link-Time Optimization (LTO) for smaller binary footprints and better chip efficiency.
Firmware Update 260513: Auto-Calibration & Battery Estimates

The May update 260513 brings major quality-of-life improvements to your Dragonfly trackers. I focused on eliminating the need for manual calibration and significantly improved how the trackers report their battery life to the SlimeVR server.

Key Highlights in Release 260513

  • 🧲 Automatic Online Magnetometer Calibration No more awkward figure-8 gestures on demand! Trackers now continuously adapt and calibrate during normal gameplay, and the calibration data survives deep sleep cycles.
  • 🔋 Remaining Battery Estimation SlimeVR Server now receives an estimated remaining runtime in hours instead of just raw voltage numbers.
  • 📈 More Reliable Battery Readings I fixed transient voltage-drop bugs that previously caused premature "low battery" scares during load spikes.
  • ⚙️ VQF Sensor Fusion Polish I resolved rare NaN rotation locks, improved computational efficiency, and filtered out invalid zero-rotation packets.
Firmware Update 260410: Wireless OTA & One-Click Shutdown

I'm bringing you another firmware update for Dragonfly trackers. In release 260410, I focused primarily on quality-of-life improvements—you can now update firmware wirelessly and power down all your trackers at once directly from the receiver.

Key Highlights in Release 260410

  • 📡 Wireless BLE OTA Updates Added the ability to enter bootloader/OTA mode wirelessly (either by pressing the tracker button 8–9 times or sending a remote command from the receiver).
  • 🔴 One-Click Shutdown Pressing the button on the USB receiver can now power down all connected trackers at once. You can also use the SlimeConsole to do this.
  • 💤 Calibration Sleep Fix Fixed an issue where trackers could accidentally enter sleep mode during temperature calibration due to perceived inactivity.
  • 🔀 Remote Command Routing Improved the receiver's "Send All" command so it only addresses currently online trackers instead of spamming all paired slots.
The Core of Dragonfly Trackers: nRF Architecture & Firmware

All my Dragonfly trackers are based on the popular stacked SmolSlime architecture, which is inherently built around nRF52840 chips. To get the absolute most out of this excellent hardware, they run on an actively developed firmware fork by jitingcn. I wanted to share why this underlying architecture, combined with its fine-tuned firmware, makes such a massive difference for your VR full-body tracking experience.

Key Advantages for Dragonfly Trackers

  • 🔋 Smart Battery Management Uses an ultra-low-power radio protocol on the Nordic nRF52840 SoC. Combined with dynamic sleep algorithms, this provides exceptional battery life in a tiny form factor.
  • 📡 Dedicated 2.4 GHz RF Link (ESB) Direct communication with my USB receiver dongle. It bypasses home Wi-Fi congestion, avoiding jitter, frame drops, and latency spikes.
  • 🎯 Native Modern IMU Support Fine-tuned hardware integration and FIFO optimizations specifically for the sensors I use (like the ICM-45686), delivering stable drift-free orientation.
  • ⏱️ Advanced TDMA Scheduling Dedicated time-slot allocation for each tracker. You can run full-body sets without trackers colliding over the airwaves.
  • ☁️ OTA (Over-The-Air) Updates Firmware updates can be performed wirelessly via the receiver or BLE—no need to dismantle cases or plug in individual trackers for updates.
  • 🎛️ Centralized Receiver Controls Handy commands are sent straight through the dongle. For this purpose, I have prepared an online console at SlimeConsole, where you can easily power down all connected trackers at the end of a session with a single click.

Listing controls

10 items total